How To Apply Magnetic Lashes for Beginners

Founder Zhou takes you STEP BY STEP on how to apply your Lashible magnetic lashes and liner. Simply follow these tips and tricks and you'll be applying your magnetic lashes in no time!

STEP 1: Prep & Basics

  • Like any makeup product, please perform a patch test before using our products. To do this, apply the eyeliner onto the skin on the inside of your wrist and wait 24 hours to see if any irritation occursIf no reaction occurs, proceed to application.
  • Ensure eyelids are completely clean, dry and free from any oils, serums, moisturizers or other skin products before eyeliner application.
  • Size lash by placing the inner corner above your iris. Trim off excess lash to prevent lifting and discomfort. (Trimming tutorial coming soon)

STEP 2: How to Apply Invisible Adhesive Liner & Lashes

  • Soften the lash band by flexing it between your fingers.
  • Shake the bottle before each use and close tightly immediately after each use to prevent any drying.
  • Apply 1-2 solid coats along your upper lash line (not onto the lash band), ensuring the line covers the entire lash band with sufficient liner on the ends for maximum hold. Only a line as thick as the lash band is required.
  • If applying 2 coats, apply the second coat immediately after the first coat. No drying time in between coats.
  • When the liner starts to become invisible, line up the inner corner of the lash to the iris of your eye and apply the lash from the inner to outer corner.
  • Grab lash near the root and press onto the liner along the whole lash to secure the bond.
  • Only a line as thick as the lash band is required for the lashes to hold, so it shouldn't feel sticky. However if it is sticky from applying too much liner, after applying your lashes simply dust some translucent powder over any exposed liner.
  • If wearing mascara with your magnetic lashes, use an oil-free, waterproof mascara and allow to dry before applying your lashes. DO NOT apply mascara directly onto your magnetic lashes as this will cause damage to them.

STEP 2: How to Apply Magnetic Liner & Lashes

  • Soften the lash band by flexing it between your fingers.
  • Shake the bottle before each use and close tightly immediately after each use to prevent any drying.
  • Apply one solid coat onto each eye as thick as the lash band. Ensure the line covers the entire lash band with sufficient liner on the ends for maximum hold. 
  • Apply a second coat onto your first eye, then apply a second coat onto your second eye.
  • When the liner is around 80% dry (not completely dry nor completely wet), line up the inner corner of the lash to the iris of your first eye and apply the lash from the inner to outer corner.
  • Grab lash near the root and press onto the liner along the whole lash to secure the bond.
  • Then apply the lash onto your second eye, in line with your iris, from the inner to outer corner and press onto the liner to secure.
  • If needed, do a touch test to check the liner is 80% dry. It should not transfer much onto your finger or be completely dry.
  • If wearing mascara with your magnetic lashes, use an oil-free, waterproof mascara and allow to dry before applying your lashes. DO NOT apply mascara directly onto your magnetic lashes as this will cause damage to them.

STEP 3: How to Get Extra Hold & Prevent Lifting (without Lash Anchors!)

  • Apply 1 solid coat of Lashible Invisible Adhesive Liner to the inner and outer corners along your upper lash line.
  • Once the liner starts to become invisible, apply one solid coat of Lashible Black Magnetic Liner onto each eye, then apply a second coat onto your first eye, then second eye.
  • When the magnetic liner is around 80% dry (not completely dry nor completely wet), line up the inner corner of the lash to the iris of your first eye and apply the lash from the inner to outer corner.
  • Grab lash near the root and press onto the liner along the whole lash to secure the bond.
  • Then apply the lash onto your second eye, in line with your iris, from the inner to outer corner and press onto the liner to secure.
  • Keep Lashible Invisible Adhesive Liner in your purse for easy touch ups on the go! If your lash lifts, simply apply the liner onto your eyelid and stick the lash back down! No need to remove the lash. Never worry about lashes lifting again or having to deal with lash anchors!

STEP 4: How to Remove Lashible Lashes & Liner

  • Grab lash near the root and gently pull off the lash band from the inner to outer corner.
  • To remove the liner from your eyelids, use an oil-based or waterproof makeup remover on a cotton pad.
  • Place the soaked cotton pad on your eyelid for around 10-15 seconds, then gently wipe off the liner.